Forced convection. Heating
Cold air from the window surface as well as cooled room air are lowered to the convector channel. The air is warmed by the heat exchanger and rushes up. In-floor convectors located directly in front of the window or glazed facades create a kind of thermal curtain, which effectively prevents the penetration of cold air into the room.
Forced convection. Cooling
Warm air from the window surface, as well as warm air, the rooms are lowered down into the convector channel. The air is cooled by the heat exchanger and follows upwards. In-floor convectors located directly in front of the window or glazed facades create a kind of curtain, which effectively prevents the penetration of warm air into the room.
Floor convectors are used in rooms with panoramic glazing or with low-lying windows: in residential premises, conservatories, in office and administrative buildings, in showrooms and sales areas. Connections: 2 x int. threads. 1/2, fits all threaded connections, Vent valve: built-in.
Al-Cu plate type
Connecting thread 2 G1/2" internal
Max. operating temperature 110 C
Max. working pressure 1.6 MPa (16 bar)
Ambient conditions at a rate. T = +2 and +40 C humidity Rh = 20 and 70%
Mounting depth: 230 mm
Mounting height: 120 mm
2 mounting lengths: 1250 mm and 1950 mm
3 grid options: anodized aluminum, heat treated ash, tinted oak
The principle of operation is forced convection with a diameter fan for heating and cooling in a 2-pipe system. Durable, stable and ready to mount box formed of galvanized steel sheet, painted in black matt color. The stainless steel condensate tray is built into the box as well as the side drain pipe.
The heat exchanger consists of copper tubes and aluminium plates, is arranged in a box in special consoles and is soundproof. Standard: indoor connection (internal thread 1/2') and air valve.
Parallel to the heat exchanger, the box is fitted with diameter fans that enhance the convection effect. The fan is in the protection housing.
Silent, smoothly adjustable fan operation is carried out via analog output to control fan speed (0 - 10 V). Servo control signal 24 V DC.
The simultaneous adjustment of the fan speed and the heat carrier mass flow rate by means of a thermal valve ensures hydraulically balanced pipeline network and energy-efficient operation with minimum temperature difference between the feed and return lines. As standard, a double-sided transverse grating of anodized aluminum or heat-treated wood is available.
Standard powder coated box: matt black. The standard color of the cross grille is anodized aluminum painted according to the RAL palette or heat-treated ash in matt and glossy finishes.